Description
Safe for weapons (68 long guns and 10 handguns), “1800” style brings a timeless style, machined & hand patinated to accentuate the natural variations of the metal - each model is unique. Manufactured in 10 gauge heavy duty steel - body and door (3,57mm thick and density of 26.79Kg per m2). 130 minutes fire-rated (1400F ° / 760C °), doubling of the body at the corners by external reinforcement, door lined around its perimeter (over the entire surface that could serve as a lever). Door locking by 16 points (1,25 ″ - 3.17cm in diameter, positioning around the entire perimeter of the door), Sargent and Greenleaf locks (mechanical or electronic as desired) protected by a steel plate with its ball bearings, anti-sabotage mechanism clutch dialpatented F-4-tungsten carbide protective plate & mechanism box shielded against drilling and punching. UL standardized & validated safe and lock - classified as residential safe (USA & Canada) with CNNP (France) and DAkkS (Germany) standardization correspondence. Set standardized according to the rules of the DOJ (Department of Justice) of the state of California when it comes to securing firearms.
Pre-drilled and compatible with the Rhino Swing Out weapon mount (swivel mount for 13 long guns)
Capacity:
- 68 long guns (13 of which can be positioned on the “Swing out”)
- 10 handguns - positioned in the door organizer
Style and manufacture
- Manufacturing & welding by hand
- Patinated by hand
- Supplied with an internal organizer (against the wall) for 10 handguns and various accessories
- Supplied with LED lighting system installed (9 rails)
Firewall and joint walls
- 4 firewall plates (5/8"/1,58cm per plate) on the top,
- 3 firewall plates (5/8"/1,58cm per plate) - bottom, sides and door
- Expansion joint (up to 7 times its volume), ensures heat and smoke tightness
- Firewall 130 minutes (1400F ° / 760C ° warranty)
Trunk body
- 10 gauge steel body (3,57mm thick and 26.79Kg density per m2)
- 10 gauge steel band with reinforcement by 16 fixing points - by angle - and 2 points in the center
- 1 slot (electrical outlet) USB connection
- Patented RhinoPlate ™ armor resistant to penetration
Doors
- 10 gauge composite steel door - lined perimeter (1/4 ″ - 0.63cm) on its external surface with 38 fixing points
- External hinge system resistant to attack
- Locking with 16 pins - 1,25 ″ -3.17cm in diameter
- Opening at 180 °
Locksmithing (and mechanical / electronic lock)
- Locks protected by a steel plate with ball bearing
- Clutch wheel of the mechanism with anti-sabotage safety device
- Armored mechanism case against drilling and punching
- Locking mechanism return spring - the door remains locked even if the latch is pulled out or tampered with
- Sargent & Greenleaf lock (mechanical or electronic as desired)
- Mechanical lock: Sargent and Greenleaf with key and code wheel
- Electronic lock: Sargent and Greenleaf with code keypad
- MIL SPEC validated - resistant to EMP (Electromagnetic Pulses) according to standardMIL-STD461F- allows access to the safe even after a PEM incident
-
Data & internal layout
- Weight: 1615lbs / 732,5kg
- Dimensions:72 "H x 56" W x 27 "D/ 182,8 x 142,2 x 68,5cm - without the handle
- Interior fittings: antique leatherette
- Shelf & wall adaptable according to need
- Locking by 3 cast iron steering wheel
- Pre-drilled and compatible with the Rhino Swing Out weapon mount
Normalization
- Safe body: standardized & UL validated - safe classified for residential area (USA & Canada) / CNNP (France) and DAkkS (Germany) standardization correspondence
- Lock: standardized & validated UL and MIL SPEC (for the electronic version) - classified safe for residential area (USA & Canada) / correspondence with CNNP (France) and DAkkS (Germany) standards
- Global: Standardized according to California State Department of Justice (DOJ) rules for securing firearms
