Description
Safe for weapons (54 long guns and 10 handguns), “1800” style brings a timeless style, machined & hand patinated to accentuate the natural variations of the metal - each model is unique. Manufactured in 12 gauge heavy duty steel - body and door (2,77mm thick and density 22,2Kg per m2). Fire-resistant 85 minutes (1400F ° / 760C °), doubling of the body at the corners by external reinforcement, door lined around its perimeter (over the entire surface that could serve as a lever). Locking of the door by 16 points (1 ″ -2,54cm in diameter, positioning on the entire perimeter of the door), Sargent and Greenleaf locks (mechanical or electronic as desired) protected by a steel plate with its ball bearings, wheel clutch of the anti-tamper mechanismpatented F-4-tungsten carbide protective plate & mechanism box shielded against drilling and punching. UL standardized & validated safe and lock - classified as residential safe (USA & Canada) with CNNP (France) and DAkkS (Germany) standardization correspondence. Set standardized according to the rules of the DOJ (Department of Justice) of the state of California when it comes to securing firearms.
Pre-drilled and compatible with the Rhino Swing Out weapon mount (swivel mount for 13 long guns)
Capacity:
- 54 long guns (13 of which can be positioned on the “Swing out”)
- 10 handguns - positioned in the door organizer
Style and manufacture
- Manufacturing & welding by hand
- Patinated by hand
- Supplied with an internal organizer (against the wall) for 10 handguns and various accessories
Firewall and joint walls
- 3 firewall plates (5/8"/1,58cm per plate) on the top,
- 2 firewall plates (5/8"/1,58cm per plate) - bottom, sides and door
- Expansion joint (up to 7 times its volume), ensures heat and smoke tightness
- Firewall 85 minutes (1400F ° / 760C ° warranty)
Trunk body
- 12 gauge steel body (2,77mm thick and 22,2Kg density per m2)
- 12 gauge steel strip with reinforcement by 07 fixing points - by angle
- 1 slot (electrical outlet) USB connection
- Patented RhinoPlate ™ armor resistant to penetration
Doors
- 12 gauge composite steel door - lined perimeter on its external surface with 14 fixing points
- External hinge system resistant to attack
- Locking with 16 pins - 1 ″ -2,54cm in diameter
- Opening at 180 °
Locksmithing (and mechanical / electronic lock)
- Locks protected by a steel plate with ball bearing
- Clutch wheel of the mechanism with anti-sabotage safety device
- Armored mechanism case against drilling and punching
- Locking mechanism return spring - the door remains locked even if the latch is pulled out or tampered with
- Sargent & Greenleaf lock (mechanical or electronic as desired)
- Mechanical lock: Sargent and Greenleaf with key and code wheel
- Electronic lock: Sargent and Greenleaf with code keypad
- MIL SPEC validated - resistant to EMP (Electromagnetic Pulses) according to standardMIL-STD461F- allows access to the safe even after a PEM incident
-
Data & internal layout
- Weight: 980lbs / 444.5kg
- Dimensions: 72 ″ H x 42 ″ W x 27 ″ D / 182,8 x 106,6 x 68,5cm - without handle
- Interior fittings: antique leatherette
- Shelf & wall adaptable according to need
- Locking by 3 cast iron steering wheel
- Pre-drilled and compatible with the Rhino Swing Out weapon mount
Normalization
- Safe body: standardized & UL validated - safe classified for residential area (USA & Canada) / CNNP (France) and DAkkS (Germany) standardization correspondence
- Lock: standardized & validated UL and MIL SPEC (for the electronic version) - classified safe for residential area (USA & Canada) / correspondence with CNNP (France) and DAkkS (Germany) standards
- Global: Standardized according to California State Department of Justice (DOJ) rules for securing firearms
