AVEC-CHEM P3 R Particle gas mask filter

Description

Particle filterAVEC-CHEMP3 R, designed for biological risks, the P3 R particle filter – to be used on a gas mask or a powered respirator – ensures the filtration of bacteria, viruses, germs, spores, dangerous particles and asbestos.

P3 certified protection (according to EN 143:2000) filters 99,9999% of biological threats (not suitable for other NRBC warfare threats), ultra-light filter (100g) to treat particles down to 0,2 microns.Filter paper (hydrophobic) can be used under the decontamination shower.

Prevents aerosol and airborne transmission of viral and bacterial threatsProvides filtration against bacteria, viruses, germs, spores, hazardous particles, asbestos, mold, vapors and aerosols.

STORAGE LIFE: 20 YEARS – IN A THERMALLY SEALED COVER

Product data and resistance to inhalation/exhalation (in Pascal):

Technical data		Resistance (Pa) / Resistance (Pa)
Diameter	110 mm	@ 30l/min. V 1) S-CHEM OF-07 260 <140	@ 95l/min. V 1) S CHEM OF-07 980 <600
Height:	85 mm
Mass
storage time	20 years (factory sealed)

• Particle filterAVEC-CHEMP3 R
• 40 mm NATO thread – STANAG 4155 standardization (EN 148-1).
• Usable with: HM / FFM / PAPR R EN 143/A1 EN 12941/AZ EN 12942/A2 EN 148-1 THB/TM3 PR SL Rd 40×1/7″

Lifespan and filtration (in %):

• P3 R according to EN 143
• TH3 PR SL EU / EN 12941
• TM3 PR SL EU / EN 12942
• Calculation of the effective lifespan in a contaminated area: concentration/DAC (dynamic adsorption capacity) –CONTACT US FOR MATHEMATICAL FORMULATION

Type and class of particle filter at a flow rate of 95 l/m		Efficiency of the particle filter at a flow rate of 95 l/m
				P3> 0,05%
	P3 -particle
	D- dust
	R- reusable

Effective filtration:

High concentrations of harmful dust that can affect the respiratory tract – highly toxic vapors and mists that can be absorbed into the bloodstream, carcinogenic particles, asbestos particles, bacteria, viruses, enzymes and spores.

Test gas			Test gas concentration		Penetration time in minutes EN	P3	DAC in grams WITH-CHEM P3
			ppm	mg/l
P3					99,9999+%		20 ± 5 mg / m3

DEPENDING ON THE TOXIC SUBSTANCE, THE FILTER MUST BE REPLACED IMMEDIATELY WHEN THE SATURATION POINT IS REACHED.

Storage:

• In a cool room, without light, regularly ventilated, without any electrical or chemical equipment
• Maximum relative humidity 95%
• Temperatures in the range between -30° and +50°C
  

After use:

• Once the cartridge is full:
  • Comply with orders from civil or military authorities
  • IF YOU ARE IN SURVIVAL MODE: Store filters in an airtight bag and bury them in the designated area (treat them as dirty and unusable)
  • If you can, bury the cartridges in concrete, lead, etc.