Description
Tactical half mask AVEC-CHEM TAPR developed for law enforcement and security agencies - designed on the basis of a full face mask, for use with helmet, weapon and optics. Provides respiratory protection against CBRN toxic agents (vapors, gases, aerosols, contaminated dusts) in conjunction with either filter cartridges or a powered respirator Comfortable and hypoallergenic, suitable for sensitive skin and long wear.
CE standardized mask EN 136: 1998, class III & EN 148-1 & STANAG 4155 (thread), manufactured from bromobutyl rubber (vulcanized polyisobutylene) - maximum impermeability to TIC (Toxic Industrial Chemicals) and CWA (Chemical Warfare Agents), excellent thermal and mechanical resistance. Hypoallergenic silicone inner half-mask, perfectly waterproof - significant reduction of CO2 in the mask & low mechanical resistance to inhalation/exhalation (greatly reduced physiological stresses on the wearer).
Two side threads (40 × 1/7 “ - 40mm NATO standard) and a central thread allow the addition of three filter cartridges simultaneously - depending on the saturation of the atmosphere with toxic agent - or of a single cartridge (the other threads being locked and sealed).
A proprietary communication system (optional) - provides the user with a communication interface with a sensitive microphone and a connection to a radio, PTT or integrated headset . The microphone is designed to transmit speech and effectively reduce ambient noise without requiring a specialized installation protocol..
Attachment of the mask by a head harness (rubber & textile) - intended for wearing with a ballistic helmet, by Fidlock mountings (on ARC rails) or with the MSA Gallet system (for law enforcement helmets, including the MSA Gallet M05006, Schuberth P100 A and Schuberth P100 F models. the design of the nose bridge allows the wearing tactical glasses.
LIFETIME: 20 YEARS / MANUFACTURER WARRANTY: 05 YEARS
LOW RESISTANCE TO INSPIRATION/EXPIRATION
RESISTANCE TO PENETRATION BY CONTAMINANTS: 48H
Comes with :
- Head clamping system
- Attachment for ARC side rails (ballistic helmets)
- Tactical holster with MOLLE attachment
- Transport box
- AVEC-CHEM P3 R Particle gas mask filter
- AVEC-CHEM P-CAN compact gas mask filter
- Communication system - 3,5 mm jack microphone
Product data:
- Manufactured from bromobutyl rubber (vulcanized polyisobutylene)
- UNIQUE SIZE
- Compatible with a ballistic helmet and night vision goggles
- Dedicated communication system (optional) - with a sensitive microphone and a radio connection
- Head harness attachment (05 straps) / Fidlock fasteners (on ARC rails) / MSA Gallet system
- 03 40mm NATO threads - for fixing three
- Unique dual valve exhalation system
- 03 40mm cartridges simultaneously (or connection with an accessory)
Not to be used:
- In an atmosphere with an oxygen level less than 19,5% - below that level a self-contained breathing apparatus is obligatory
- In an explosive atmosphere greater than the 01 class (for Europe and France refer to the ATEX classification - zone 01)
- As far as possible, no beard, no long hair - for an optimal sealing
Standardization & certification:
- Mask and mas sub-set: AND 136: 1998
- Host threads : EN 148-1- STANAG 4155
- In service: Saudi Arabia, Czech Republic, Norway, Portugal, Chile, Turkey, Kuwait, Latvia & Lebanon
Technical data :
| 120g | black |
| : universal fit | 73% |
| 34% | Rd 40 × 1/7 ″ |
| > 48 hours | |
| - 30 ° C up to + 70 ° C |
| Inhalation resistance | |||
|---|---|---|---|
| at 30 l / min flow rate | at 160 l / min flow rate | ||
| EN 1) | S – 97 | EN 1) | S – 97 |
| 50 | 15 | 300 | 135 |
Material:
| bromobutyl rubber, non-irritating | natural rubber, non-irritating |
| five-point, rubber-textile |
Storage:
- In a cool room, without light, regularly ventilated, without any electrical or chemical material
- Maximum relative humidity of 65%
- Temperatures in an amplitude between 10 ° and 25 ° C
