Description
WITH-CHEM OM-90 gas mask – Developed for the benefit of the Czech forces, designed for use in hostile zones, within integrated units. Designed for use with weapons and optics, provides protection of the respiratory tract and face against toxic NRBC agents (vapours, gases, aerosols, contaminated dust) in conjunction with either filter cartridges or a powered respirator.
CE standardized mask EN 136: 1998, class III & EN 148-1 (thread), manufactured from bromobutyl rubber (vulcanized polyisobutylene) - maximum impermeability to TIC (Toxic Industrial Chemicals) and CWA (Chemical Warfare Agents), excellent thermal and mechanical resistance. Hypoallergenic silicone internal half-mask, perfectly waterproof - no fogging, even with sustained effort - significant reduction in the presence of CO2 in the mask & low mechanical resistance to inspiration / expiration (physiological constraints of the wearer greatly reduced ).
Two side threads (40 × 1/7 “ – 40mm NATO standard) allow the addition of two filter cartridges simultaneously – depending on the saturation of the atmosphere with toxic agent – or with a single cartridge (the second thread then being locked and sealed). The hydration system – which allows you to drink in a contaminated area – is immediately operational (a bottle is provided with the mask).
The communication system allows understanding of 95% of voice exchanges - up to a distance of 2 to 3 meters, without sound distortion. The mask is attached to a head harness (rubber & textile) - suitable for ballistic helmets, integration of eyeglasses (not included) in the mask compartment if needed, sweat evacuation via the exhalation chamber (allows for long wear).
LIFETIME: 20 YEARS / MANUFACTURER WARRANTY: 05 YEARS
LOW INSPIRATION / EXPIRATION RESISTANCE
RESISTANCE TO PENETRATION BY CONTAMINATION AGENTS: 48H
Product data:
- AVEC-CHEM CM-90M Tactical Gas mask for CBRN Defense
- Manufactured from bromobutyl rubber (vulcanized polyisobutylene)
- THREE AVAILABLE SIZES
- Vision through two operculums – about 80% (polymer manufacturing)
- Hypoallergenic silicone internal half-mask - no fogging, even during exercise
- Compatible with a ballistic helmet and prescription glasses
- Integrated hydration system - compatible with CAMELBACK adapters (one water bottle included)
- Comm system - 95% distinct understanding of conversation
- Sweat evacuation of via the exhalation chamber
- Fastening by head harness (05 straps)
- 02 40mm NATO threads – for attaching two 40mm cartridges simultaneously (or connection with a respirator)
Not to be used:
- In an atmosphere with an oxygen level less than 19,5% - below that level a self-contained breathing apparatus is obligatory
- In an explosive atmosphere greater than the 01 class (for Europe and France refer to the ATEX classification - zone 01)
- As far as possible, no beard, no long hair - for an optimal sealing
Standardization & certification:
- Mask and mas sub-set: 136: 1998, class III
- Host threads : EN 148-1
- In service: Saudi Arabia, Czech Republic, Norway, Portugal, Chile, Turkey, Kuwait, Latvia & Lebanon
Technical data :
500g | black |
3 | 73% |
34% | Rd 40 × 1/7 ″ |
> 48 hours | |
max. 20 Pa | max. 50 Pa |
max. 60 Pa | 95% |
230 ml / min | - 30 ° C up to + 70 ° C |
Material:
bromobutyl rubber, non-irritating | natural rubber, non-irritating |
silicate glass | polyoximethylen, polyamide |
PET | five-point, rubber-textile |
Available sizes:
Size No. | Size in mm |
Size .1 | 5.19 - 5.51 inch (small) |
Size .2 | 5.51- 5.82 inch (medium) |
Size .3 | 5.82 - 6.14 inch (large) |
Storage:
- In a cool room, without light, regularly ventilated, without any electrical or chemical material
- Maximum relative humidity of 65%
- Temperatures in an amplitude between 10 ° and 25 ° C